Advertisement
Advertisement
Table of Contents
Summary of Contents for szwengao C300S Series
-
Page 2: Important Safety Instructions
◆ Confirm the voltage available at each country location before using the charger. ◆ The C300S series is designed to charge 12V, 24V, 36V and 48V lithium batteries. Do not attempt to use with batteries with voltages not matching the chargers specified voltage. -
Page 3: Charging A Battery
NOTE This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, The reception can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ◆... - Page 4 FUNCTION & SAFETY Input to Output 3KVac/10mA/1min Dielectric strength (test 1min) Input to Case 1.5KVac/10mA/1min Output to Case 0.5KVDC/10mA/1min Ground impedance < 0.1 Ω Ground test Safety standard GB4943/EN60950, reference CE & RE EN55022 - Class B ESD & RS EN/IEC 61000-4-2 &...
- Page 5 2-STAGE AUTOMATIC CHARGING This is a fully automatic battery charger with 2 charge stages. Automatic charging protects your battery from being overcharged so you can leave the charger connected to the battery indefinitely. 2-stage charging is a sophisticated charging technique that gives your battery longer life and better performance compared to using traditional chargers.
-
Page 6: Specifications
◆ If the product is not covered under the terms of this warranty. szwengao will advise you of the costs to carry out any repairs necessary and the unit will be shipped to you on receipt of payment for the work including the return freight charges.
Need help?
Do you have a question about the C300S Series and is the answer not in the manual?
Questions and answers