Insert or replace batteries Please install the battery before use. Unscrew the battery cover on the eyepiece of the device. Install one 18650 lithium battery. Make sure the battery polarity is correct. Close and tighten the battery cover. Insert Micro SD card ...
shot button, a “no SD card” prompt will appear. Basic operation Starting up 1.Keep pressing the power button for 3 seconds to turn on the device. Keep pressing the power button for 3 seconds again to turn off the device. 2.After powering on, press the MENU button to enter the menu.
Page 8
according to the light at the time. The darker the light, the higher the gear adjustment. Long press the IR /up button to zoom. Changing The Modes The night version has 3 different modes: photo mode, video mode and playback mode. Press the mode button to change modes.
Page 9
the IR shift button to turn on the infrared light. There are 7 gears for the infrared light, please select IR gear according to the current light. The darker the light, the higher the gear adjustment. Press the shot button to take a photo. Camera mode Photo Resolution Night vision...
Page 10
not, press the Mode button to switch to Video mode. 2. Zooming: Keep pressing the button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen. The value of magnification level appears on the LCD screen.
Video mode Digital zoom indication Video Resolution Infrared light gear Recordable time Battery status SD card prompt IR – LED (Night vision function) Regarding manual focusing: If you are too far from the target, please rotate the lens to the left. If you are too close the target, please rotate the lens to the right.
Page 12
In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LED, the image will change to black and white. The IR LED have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level.
Settings in Photo and Video Mode Press Menu button in photo or video mode, can change the settings. Menu Function Set the photo resolution. Photo Options: [3M 2048 x1536]/[2M 1600 Resolution x1200]/[1M 1280x 960]/[VGA 640x480] Set the video resolution. Video Size Options:[FHD 1920x1080]/ [960 1280x960] / [640 640x480].
Page 14
in local region to prevent interference. Options:[50Hz]/[60Hz]. Set the time to shut down the device Power for power saving if the device is idle. Save Options:[3min]/[5min]/[10min]/[OFF] Set the date and time of device. Date&Time Add the date stamp on the photo or Date video files.
switch to playback mode. 2. Press Up/Down button to view photos and video files. 3. Playback the video - Press the Shot button to start playing the video files. - Press the Shot button again to have a pause. - Press Menu button to stop the current video playing. Press Menu button in playback mode, the screen will display the playback menu.
Long press "Menu" ->Luminous Green Color Effect, Long press "Menu" ->Film Color Effect, Long press "Menu" ->Get back to the normal color mode. Download files to PC There are two ways to download files from the device to a computer: By inserting the memory card into a card reader.
Page 17
through the supplied USB cable. 2. When connecting to the computer, it will appear “MSDC” on the screen. 3. Open [My Computer] or [Windows Explorer]. A "Removable Disk" appears drive list. Double-click the "Removable Disk" icon to view its contents. Files stored on the camera are located in the folder named "DCIM".
Page 20
The CE marking complies with the European standards and indicates that the product meets the requirements of the applicable EU directives. The complete declaration of conformity found website www.braun-phototechnik.de directly product page. BRAUN PHOTO TECHNIK GmbH Merkurstrasse 8 72184 Eutingen / Germany E-Mail: post@braun-phototechnik.de Internet: www.braun-phototechnik.de...
Need help?
Do you have a question about the Night Vision 4.0 and is the answer not in the manual?
Questions and answers