Thank you fo r pu rchasing our wirel ess video door p hone system. Before carrying out the installation, please read this user’s manual carefully and follow all the guidelines during the process of installation and operation. Contents Features……………………………………………………………………1 Components checklist……………………………………………………1 Products description………………………………………………………2 ………………………………………………………………………3 Cradle...
Features ● Wireless colour video doorphone ● Mobile handset with 2.4 TFT-LCD screen ● Identify and screen callers ● Unlock doors remotely for visitors ● Range in free field 300 meters ● 12 selectable ringtones ● Handset to handset communication (Paging) ●...
Button description “ON/OFF”button: It is used to power on/power off of wireless handset monitor. “ ”: Is used to:a) answer the calls when visitors press the call button in outdoor call station; b) as the confirmation button when performing the ringing tone selection; c) as the coding button when carrying out coding between the components.
letters “ Configure code ” , then release the buttons and it will enter the coding status. 2).At this time, press the call button in outdoor camera when it is in standby status until the red indicator remains lit and creates two sounds “Di Di ”, then release the button and it will enter the coding status.
you hear the two “Di Di” tones. Then release the call button in outdoor call station (Do not release until you hear the two Di Di tones ). Then press the “ ” button in the handset at this time. If it shows “successed”...
Outdoor call station: Press the code-clear button (th e code-clear butto n is in the ba ck of outdoor call station, for details, please refer to the connect ion lock section. Its icon is . ) and it creates one “Di” sound. This means that code clearing is successful.
status, then the screen will display “ monitoring 01 ” . 2).If the outdoor call station receives a signal within 1S, then it will display the 1st outdoor station; if not receiving the signal within 4S, then it will auto-exit the monitor status. 3).In monitor status, press the “...
Page 12
120S. 4).In the process of talking, pressing the “ ” button will operate the relay at the call station which can be connected to operate an electric lock release and allow the visitors enter, the monitor will display “ unlock ” (If visibility is poor, pressing the “ ”...
Handset intercom (Paging): 1).In standby status, if the user presses the “ ” in one handset monitor, then the red indicators will light and enter the call status. The screen will display“ Talking”. 2).a.If there is no response signal with 4S from called handset monitor, after 4 “Di Di Di Di”...
tone , release the call button and the unlocking time will now be set at 1.8 seconds 2).The 2nd unlocking time is 4S. With power disconnected, press and hold the call button on call station, and connect power to this call station.
Technical specifications Door Station Image Sensor 1/4" CMOS 0 Lu (IR on) Min. Illumination Power DC5V/1A 20mA~30mA (standby), 300mA (operation) Current 12-digits digital audio signal, DAC interface, Audio Input 8Kbps sampling speed rate Image Compression MJPEG compression Transmission Power 16~20dBm Ringing tone 12 options selectable Dimension...
Trouble shooting Checking Debug Malfunction Press the ON/OFF button Check by pressing the ON/OFF button fully Will not Check whether the power of Charge the battery power on lion battery is enough or not Check the connection of Connect to the power power adaptor adaptor Check whether the socket in...
Propagation of radio waves The radio coverag e quality, and therefo re the performance of the doorphone, may be altered by obstacles located between the door station and the interior handset unit: walls, partitions, slabs, armoured doo rs or lift shaft comprising metallic components.
Notes 1).Handset monitors should be situated away from heat sources and water. 2).Products should be opened only by the professional personnel. If there is a malfunction please contact us or our agents. 3).Handset monitors should be loca t ed where th e re is a good ventilation, dry, dustless and not in direct sunlight .
Page 20
FCC ID: YL4CS-32WK FCC ID: YL4CP-3224WK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.