Summary of Contents for DINKO Instruments D-35
- Page 1 HOT PLATES Models D-35 / D-39 Sand Baths INSTRUCTION MANUAL June 2022 Mark c/Encarnació, 123-125. Phone +34 932 846 962. Fax +34 932 104 307 e-mail: dinter@dinko.es www.dinko.es 08024-Barcelona...
-
Page 2: General Introduction
-The European norm for use 89/655/CEE it exempts the maker all responsibility when it lacks an appropriate maintenance or there is alteration or change of some component. -The apparatuses that are sent to the Technical DINKO Instruments Service they will be perfectly clean and disinfected. -
Page 3: Auto Tuning
OPERATING INSTRUCTIONS- Thermostat models 1- Rotate the power control know totally in contrary to the needles clock. Place the switch to OFF position. Put line cord into a suitable powerline. It is important follow these instructions before passing the point 2 in order to avoid damages in the main switch. 2- Push the ON switch. -
Page 4: Warranty
Before proceeding to any exam or repair it is necessary to disconnect of the mains. All initiative should be made by qualified personnel to avoid bigger wrongs. Trust their apparatus to a technical service authorized by DINKO Instruments. Code Description Spares 1.8040.00... -
Page 5: Ce Declaration Of Conformity
-Requirements for laboratory equipment for heating materials EN 61010-2-010 Mounting and connecting instructions defined in catalogues and technical data sheets must be respected by the user Name: Joan A. Bravo Josep X. Sensada Position: Technical Manager Quality Manager Signature: Model: Hot Plates D-35 / D-39... - Page 6 - Sand Baths - Temperature Controllers - Timers - Turbidimeters - Turn Dishes - Vacuum Pumps DINKO Instruments DINTER, S. A. c/ Encarnació, 123-125. Phone +34 93 284 69 62. Fax +34 93 210 43 07 / 08024-Barcelona e-mail: dinter@dinko.es www.dinko.es...