Summary of Contents for Mini Mania Mount Gen 3 Pro Series
- Page 1 Pro Series Smartphone Mount Gen 3 MINI Smartphone Mount Pro Series | Ver 1.1 CRMC-1000-R130 Instructions for both the XL Scissor and XXL Clamshell Cradles for Gen 3 MINIs 1 of 5...
- Page 2 XL Scissor and XXL Clamshell Cradles for Gen 3 MINIs Overview Thank you for purchasing the MINI Smartphone Mount Pro Series from Mini Mania. This kit is designed to allow the driver to position a smartphone for heads-up view without needing to handle the device.
- Page 3 2. Slide the tach towards you and remove the electrical plug from the rear of the tach to free it completely. 3 of 5...
- Page 4 2. (continued) 3. Remove the 3 screws in the back of the tach. (TORX) 4 of 5...
- Page 5 4. Place the “U” bracket in place and using the provided screws, tighten it down. 5. Re-connect the electrical clip, slide your tach back into place and put the screws on either side back into place. 5 of 5...
Need help?
Do you have a question about the Mount Gen 3 Pro Series and is the answer not in the manual?
Questions and answers