Proper Use; Operation - Boso Bosch+Sohn bosotherm 1200 Instructions For Use Manual

• When in use, the electronic components in the switch of the heating pad make the switch slightly
warm. The switch should therefore never be covered or placed on the heating pad when it is
being operated.
• Do not pull, twist or make any sharp kinks in the cables.
• Do not stick pins or pointed objects into this heating pad.
• This appliance may not be used by children unless the switch has been preset by a parent or a
supervisory person, or the child has been sufficiently instructed in how to use this heating pad
safely.
• Children should be supervised to ensure that they do not use the heating pad as a toy.
• This heating pad must be checked frequently for signs of wear or damage. If such signs are
present, or if the cables are damaged, or if this heating pad has been used incorrectly, it must
be taken to either the manufacturer or the dealer before further use.
• Repairs may only be carried out by specially trained personnel or at an authorised repair work-
shop, as special tools are required. Incorrect repairs may cause considerable danger to the
user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This heating pad is designed for warming the human body. It allows you to apply tar geted warmth.
Heat promotes the circulation and relaxes the muscles. This heating pad is not intended for use in
hospitals or for commercial applications. In particular, it may not be used on infants, small children,
persons insensitive to heat, helpless persons or animals.
To avoid soiling or damaging the heating pad, we recommend using a fabric cover, particularly
when applying essential oils and ointments.
When used for the first time, the heating pad may start to smell of plastic but this will soon go
away.

3. Operation

3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the entire
surface of the heating pad from overheating by automatically switching off in the event of a fault.
If the safety system switches off the heating pad automatically as a result of a fault, the indicator
lamp is no longer illuminated even when the heating pad is switched on. Please note that, after a
fault has occurred, the heating pad can no longer be used for safety reasons and must be sent to
the service address indicated.
3.2 Putting into operation
First check that the switch is connected to the heating pad at the plug-in con-
nection. Plug the power cord into the mains outlet.
3.3 Selecting temperature
The fastest way to heat up the heating pad is to first set the switch to the highest setting. A lower
setting can be selected later if required.
After switching on the heating pad, the setting starts flashing briefly, while the heating pad conducts
a self-test. Then the setting remains illuminated continuously.
We recommend the lowest temperature setting for extended use of the heating pad.
3.4 Temperature settings
Level: 0 Off
1 Minimum heat
2 Medium heat
3 Maximum heat
7