Pip Function In Pc Mode - Leadtek WinFast TV Pro 1920S User Manual

3.6.3
If you do not want to keep a channel whose noise level is too
high, you can enter TV Tuning menu, and select CH.Skip. Then
the channel will be deleted.
3.6.4
If you want to put the channels from a station in sequence, you
can enter TV Tuning menu, and select CH. Swap. For example,
TTV and CTV are now located in channel 8 and channel 10
respectively and you want to arrange them in channel 1 and
channel 2 respectively. You can conduct the following
operations: Select TTV, enter TV Tuning menu, select CH swap
option, change the channel number from 8 to 1, and then press
button. Similarly, you can change CTV from Channel 10 to
Channel 2 in the same way.

3.7 PIP Function in PC mode

(a) In TV or PC mode, press
and a small window will be displayed on the upper left of the
screen after 1-2 seconds, and the sound is also changed.
Press
the third time to recover. For the fourth press, PIP is
cancelled.
(b) Press
the position of PIP window.
In PIP mode, press
S-Video. (Note: In PC mode, volume can be adjusted
without menu displayed.)
(c) You can switch PC and TV by the standby
again to enlarge the window, and press
and buttons on the remote control to adjust
button on the remote control,
button to switch between Video and
15
for
button.