ZANEEN ALDABRA HIDRA MONOCRHOMATIC 24Vdc Instruction Sheet

HIDRA H1
60mm (2 3/8")
49mm (1 15/16")
HIDRA H2
110mm (4 5/16")
49mm (1 15/16")
HIDRA H3
57mm (2 1/4") 110mm (4 5/16")
Note: Prior to installation it is recommended to contact Zaneen Post-Sales Support
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com postsalestech@zaneen.com
HIDRA MONOCRHOMATIC 24Vdc
Instruction Sheet
Important:
The main power must always be TURNED OFF, prior to installation. Verify the minimum
and maximum amount of LED written on the powersupply.
Do not test the LED individually. For connection without a dimmer, connect the green
wire (signal) with the black wire (negative).To be cleaned only with water and neutral soap.
It is the installers' responsibility to ensure that the wiring connection is IP68 rated and no
humidity or water is allowed to penetrate from the wiring sleeves into the luminaire.The
waterproof connection box MEL.0137.99 should be used.
IN
Power supply
24v dc
± 5%
IP65
OK
OUT
+
+
LED
-
-
960°
RoHS
IK05
C US
+ +
LED LED
- -
NO DIM
DIM
Page 1 of 2