CRL LUGANO Manual

C.R. LAURENCE CO., INC.
P R O F E S S I O n A L Q U A L I T y
3-1/8"
(79mm)
2-3/16"
(55mm)
REGAL
Glass-to-Glass Hinge (180° Application)
C . N . REG180
LUGANO
AT O
Wall Mount Bracket LU90S
5/16" (8mm) Glass
*Maximum
CAT. NO. LU90S

Door Capacities

Weight

STANDARD CUTOUT

Using 2 Hinges
90 lbs.(41 kg)
scale: 1/4" = 1'-0"
Using 3 Hinges
130 lbs.(59 kg) 34"(864 mm)
*NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
*NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
For technical assistance in the United States call toll free (800) 421-6144; from Canada call toll free (877) 421-6144;
C.R. Laurence Co., Inc.
Outside the U.S. and Canada call (323) 588-1281. Ask for Tech Sales at Extension 7740. Toll free fax (800) 458-7496.
crlaurence.com
For Technical Assistance in the United States and Canada 1.800.421.6144. Press 2, then option 1
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058
* SEE TEMPLATE ON BACK *
Refer to Dimensions Shown
to Ensure Accuracy
2-7/16"
(61mm)
3/8" (10mm) Glass
Width Weight Width
30"(762mm) 90 lbs.(41 kg) 30"(762mm)
130 lbs.(59 kg) 34"(864 mm)
• 1.800.421.6144

Important Information:

1). This is a one-direction hinge and is designed for an outswing application only.
A door strike is required so the door isn't allowed to swing inward and damage the door glass.
2). This hinge comes equipped with a self-centering mechanism that is fully adjustable. By loosening the

Specifications:

Allen head screw that serves as part of the pivot barrel, the hinge's self-centering position can be altered.
Simply loosen the Allen screw and swing the door to the desired position. Now tighten the Allen screw, Material:
and you have established a new-centering position.
Glass Thickness Range:
3). Changing the angle alters the location of the holes to be drilled in the glass! Before fabricating the glass to
Hole Size Required:
any other angle than what's shown, consult with C.R. Laurence's Technical Sales Department:
Includes:
In the United States call (800) 421-6144; from Canada call (877) 421-6144;
Outside the U.S. and Canada call (323) 588-1281. Ask for extension 777.
Specifications:
Glass Sizes: 5/16" (8mm) to 3/8" (10mm) thick tempered safety glass
Construction: Solid brass
Closing Type: Self-centering when within 15˚ of closed position
Two Holes Required
Includes: Gaskets, screws and template

Use of Gaskets:

For 5/16"(8mm) Glass: Use one thick gasket on each side
For 3/8"(10mm) Glass: Use one thin gasket on each side
1/8" [3mm]

Recommendations:

For public safety, we recommend the use of only tempered safety glass.
Do not use power tools when installing these hinges.

Maintenance Guidelines:

• Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer
that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that
drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware.
If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar
product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.
• crlaurence.com
Solid brass
5/16" (8mm) to 3/8" (10mm)
1/32" (26mm) and 1/4" (32mm)
Mounting, screws and gaskets
1-13/32"
[36mm]
2-9/16" [65mm]
© Copyright 2005, C.R. Laurence Co., Inc_SDT21_U5
© Co pyr i ght 2 02 2 , C. R. Lau re n ce Co. , I n c _S DT 2 2 _2 2
IN
OUT
4A-13
4A-23