Advertisement
Before the first time you use your Sound Glow Sound Bar Speaker
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows:
1. Insert the Micro USB Plug (13) of the USB Charging Cable (12) into the Micro USB DC Port (8) on rear
panel of the Speaker to charge the internal battery.
2. Insert the large USB plug on the other end of the USB Charging Cable (12) into a suitable USB charger
rated at 5 volts 1 amp minimum.
3. The Charging Indicator (11) will light red to show the internal battery is charging. Once the battery is
fully charged, the Charging Indicator (11) will go out showing that the internal battery is fully charged
and the USB Charging Cable (12) can be removed.
NB the Speaker can be used normally during charging.
Operating Instructions
Using the Bluetooth Mode
1. Press and hold the Power button
speaker.
2. The speaker will light up.
3. Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth compatible device and set it to
search.
4. Select 'AVS1407' from the search results found by your device which will now pair with the speaker.
Once the device has paired the speaker will chime.
5. Enable the music player on your Phone, Tablet or other device you are using.
6. Press the Play/Pause/Phone button
7. Briefly press the skip forwards
played.
8. Press and hold the skip forwards
volume level.
9. Alternatively use your devices controls in the usual manner.
Using the AUX/LINE Input
The AUX/LINE Input allows a direct wired connection of an external audio device (such as a mobile phone,
music player, Hi-Fi, etc.) via a 3.5mm jack socket input on the rear Panel.
1. Press and hold the Power button
speaker.
2. The 3.5mm Jack to Jack lead (14) into the AUX socket (7) on the rear panel of the Speaker.
3. The speaker will automatically detect the lead and switch to AUX mode.
4. Insert the other end of the lead into the external audio device you are playing from.*
5. Press and hold the skip forwards
volume level.
*The supplied lead may not be compatible with the external audio device being used and an alternative
lead may be necessary.
(3) on the Front Panel for three seconds to power up the
(4) to start and stop (pause) the connected device playing.
+
(5) and skip backwards
+
(5) and skip backwards
(3) on the Front Panel for three seconds to power up the
+
(5) and skip backwards
–
buttons (1) to change the track being
–
buttons (1) to increase and decrease the
–
buttons (1) to increase and decrease the
5
Advertisement
