Changing The Basic Set- Tings; Programme Counter; Calling Up The Programme Counter; Cleaning And Servicing - Bosch WAN20052IL User Manual

Table of Contents

Advertisement

en Programme counter
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Start / Reload
2.
the same time, turn the pro-
gramme selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 31
To change the value, press Finish
4.
.
in
To save the changes, switch off
5.
the appliance.
16 Programme counter
The program counter displays the
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press Start / Reload
2.
the programme to position 2 at the
same time.
Set the programme to position 5.
3.
32
17 Cleaning and servi-
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
 and, at
17.2 Cleaning the detergent
1.
2.
and set
cing
CAUTION
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the programme Cottons 90°
without laundry and using washing
powder that contains bleach.
drawer
Pull out the detergent drawer.
Press down on the insert and re-
move the detergent drawer.

Advertisement

Table of Contents
loading

Table of Contents