Sunbeam FoodSaver VAC660 Instruction Booklet page 11

How to Vacuum Package using FoodSaver
Bottle Stoppers and Deli Containers - Continued
4. Place the container adaptor over the grey
vacuum valve on the container lid. See
figure 4.
5. Lock the latch on the side of the
appliance before vacuuming.
6. Press 'Canister' Button to begin vacuum
process. Motor will run until vacuum
process is complete.
7. When motor turns off, gently twist and
remove Accessory Hose from appliance
and container.
Important: After vacuum packaging, put deli
container in refrigerator or freezer. Allow hot
foods to cool to room temperature before
vacuum packaging. Otherwise, the contents
may bubble up out the container.
How to Open the FoodSaver
To open, press and hold down the grey rubber
button in the centre of the lid. This will
release the vacuum – a hissing sound can
be heard as the air rushes in.
How to Remove the FoodSaver
To remove, simply twist and pull up on the
Bottle Stopper to release the vacuum.
How to Open FoodSaver
To open, lift the grey rubber cover in the
centre of the lid. This will release the vacuum
Figure 4
– a hissing sound can be heard as the air
rushes is.
*FoodSaver
IMPORTANT: Remember to remove the
Accessory Hose from the Accessory Port on
the appliance before you vacuum package in
FoodSaver® Bags.
DO NOT STORE CANISTER IN THE FREEZER.
Canisters,
®
Canister
®
Bottle Stopper
®
Deli containers
®
Deli containers sold separately.
®
11