Download Print this page

Taiyi Tech YT190428A Instruction Manual

Wireless charger

Advertisement

Quick Links

Chargeupp Wireless Charger Instruction Manual
Safety Instructions
Read and follow all safety instructions.
temperature between 0℃ to 50℃ with ambient humidity less than or equal to 90%. Pad or battery of
1. Applicable operation temperature range is from 0℃ to 30℃ and can be stored at ambient
the charging mobile device may be damaged if Pad is not being used properly.
2. Avoid Pad receiving violent impact or intentional pressing, exposing to the sun and rain, or getting
contact with corrosive substances. Keep away from fire.
3. Use Pad with certified adapter ONLY or those applied to international standard rules (5V/2.5A, 9V/2A,
12V 1.5A).
4. Do not disassemble, modify or repair Pad yourself. Contact your distributor for after sale service if
there's any questions.
5. Avoid children and pets chewing or swallowing Pad.
6. Recycle Pad properly for environmental protection.
Hazardous substance test result:
Mercury / Cadmium / Chromium 6 / PB / PBDEs (O)
O: Content of the hazardous substances in all homogenous materials of the part is below the prescribed
limits in accordance with GB/T26572 standard.
Lead (X)
X: Content of the hazardous substances in a homogeneous material of the part is exceeding the
prescribed limits in accordance with GB/T26572 standard.
Parts
A. Wireless charger surface
B. Wireless charger plug-in
C. Indicator light
User Guide
1. Plug in USB to power with certified adapter (QC 2.0 adapter is required).
Model: YT190428A

Advertisement

loading

Summary of Contents for Taiyi Tech YT190428A

  • Page 1 Chargeupp Wireless Charger Instruction Manual Model: YT190428A Safety Instructions Read and follow all safety instructions. temperature between 0℃ to 50℃ with ambient humidity less than or equal to 90%. Pad or battery of 1. Applicable operation temperature range is from 0℃ to 30℃ and can be stored at ambient the charging mobile device may be damaged if Pad is not being used properly.
  • Page 2 2. Place mobile device (with wireless receiver built-in or attached) onto Pad's surface evenly and properly. 3. Remove mobile device from Pad's surface when it is fully charged. Indicator light description 1. Indicator light will be on for about 4 seconds for self-testing after connecting with power. 2.
  • Page 3 FCC ID: 2ATOD-YT190428A Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.