Table of Contents
Advertisement
first time
6 Before using for the
first time
Prepare the appliance for use.
first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Turn the programme selector to
1.
Drum Clean .
Close the door.
2.
Pull out the detergent drawer.
3.
Pour approx. 1 litre of water into
4.
the manual dosing compartment.
Add washing powder that contains
5.
a bleaching agent to the manual
dosing compartment.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
6.
Press Start / Reload to start the
7.
programme.
a The display shows the remaining
programme duration.
a After the programme has ended,
the display shows: "End".
Start the first wash cycle or set the
8.
programme selector to
off the appliance.
→ "Basic operation", Page 31
first time en
to switch
19
Advertisement
Table of Contents
