Page 3
Shortcut Press Share Button: Enable camera hotspot Keep pressing Share Button: Start Live Streaming Tap Setting Button in Non IRIS4G interface: Adjust Volume Charging 1. Connect Sioeye Charger with a USB Charger 2. Open the battery slot, take out the battery 3. Put battery into Charger to start charging OR 1. Open the I/O cover. 2. Insert USB cable in USB/MHL Port. 3. Charge the battery by connecting IRIS4G USB Cable with a charger or a computer. During the charging process, indicator light will turn on. When the charging process is completed, the indicator light will turn off. Inserting Battery 1. Slide the button aside the battery slot to unlock the slot. 2. Open the cover. 3. Place the battery pack properly, confirming each side is facing the correct direction. 4. Press battery slot, the cover will be closed automatically. Inserting Memory Card 1. Open the I/O cover. 2. Insert the memory card properly,confirming each side is facing the correct direction. ...
Capture Shoot photos Live Streaming Live streaming your action to Sioeye Live or Youtube Video time appears to be moving faster, every 3 or 5 or even Time Lapse 10 seconds action will be compressed down to 1 second. ...
Altimeter Record real-time altitude of the action in the video Speedometer Record real-time speed of the action in the video When IRIS4G rotates 180 degree, the screen will rotate 180 degree Up/Down accordingly, making the view upside down. Bluetooth Pair IRIS4G to Bluetooth devices...
Date & Time Set system date and time Account To sign in/out Sioeye, Twitter or YouTube account Display memory storage status. Disk also can be formatted in this Storage Status setting. Reset Reset all settings to factory default System Upgrade Sioeye software.
Follow‐up Connections Enter Quick Settings in IRIS4G 1 to turn on Hotspot. Launch the Sioeye appon your smartphone. In the Sioeye app, tap to select IRIS4G hotspot If automatic connection failed, please scan the QR code again as illustrated in the Initial Connection instructions. iOS Enter Quick Settings in enable Hotspot. IRIS4G Select “Sioeye SSID” in iPhone’s Wi‐Fi list. Input the password as it appears in ...
Page 8
Instructions: To open the housing, slide and lift the buckle above the housing. Put it into the Diving Housing. Clip the Housing front with the buckle. Push down the buckle to snap the housing. Housing Mode will be appeared when installed successfully. Flat Surface Mounting Curve Surface Mounting Vertical Mounting ...
Page 9
Side Mounting Backdoor for Water Housing Standard Backdoor Skeleton Backdoor Instructions: Open the Diving Housing. Pull down the Backdoor so it can be detached (Make sure the rotary union is detached). Align a new Backdoor with the hinge. Push up the Backdoor. Clip the Water Housing. ...
Page 10
The 15.19 statement is used. They should have used the one for Licensed devices: “This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.” Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the IRIS4G and is the answer not in the manual?
Questions and answers