Table of Contents
Advertisement
Assembly and Disassembly
Attaching the antenna
1.Rotate the antenna clockwise
until it is fastened.
Note: To remove the antenna,
please rotate it
counter-clockwise.。
Attaching the battery
1.Put the battery flatwise into
the radio, as shown in
,
horizontally push the battery
latch to the top along the
aluminum slot until a
clickety-clack sound is heard.
Note: If the battery is not
fastened or is still loose,
please remove the battery
and reinstall.
Removing the battery
1.As
shown, hold the radio
like this.
2.As
shown, push up the
battery latch with another hand.
3.Yank the battery as arrow
direction shows in
.
Attaching the belt clip
1.As shown in the picture,
push down the belt clip
along the slot.
2.If it is required to
disassemble the belt clip,
push the belt clip shrapnel
upwards and pull it out.
6
Advertisement
Table of Contents
