Follow Me Function; Auto Restart; Wireless Connection - Danby DPA120HB9IBDB-6 Owner's Manual

OPERATING INSTRUCTIONS

FOLLOW ME FUNCTION

There is a temperature sensor built into the remote
control that will continuously collect the current
room temperature. Keep the remote control with
you and the appliance will automatically adjust the
set temperature based on the current temperature
where you are located to reach the most
comfortable condition and temperature.
Press the follow me button to activate the follow me
function. The remote will send a signal to the air
conditioner every 3 minutes, so long as you remain
within range of the appliance.
If the appliance does not receive a signal from the
remote during any 7 minute interval, it will beep to
indicate that the follow me mode has ended.
The maximum distance for the follow me feature is
8 meters (26 feet). This feature is available in cool
and auto modes.
LOUVER ADJUSTMENT
When the unit is turned on, the louver opens fully.
Press the swing button to being the louver
movement. The louver will swing up and down
automatically. Press the swing button again to stop
the automatic louver swing.
Please do not adjust the louver manually.

AUTO RESTART

If the unit loses power unexpectedly, it will resume
the previous settings once power is restored.
When the unit has been turned off, it cannot be
restarted for 3 minutes to protect the internal
components.

WIRELESS CONNECTION

This appliance can be controlled with a wireless
application on your wireless device.
Visit https://www.danby.com/support/#apps
to download the application and learn about its
operation.
17