Advertisement
AGALMIC
PW001Weight Sensor: User Manual
Download the App
The PW001Weight Sensor requires the Pulsa mobile app to scan identification codes and for
initial setup. The Pulsa mobile app is available on Android and Apple iOS operating systems. The
Pulsa mobile app can be downloaded for free at:
Android - Google Play
Apple iOS - Apple App Store
Turning on and maintenance
PW001Weight Sensors are maintenance-free devices. They are always on and operating if a
2.7V to 3.5V power source is supplied. The PW001Weight Sensor is shipped to the customer
with a battery installed and the product works out of the box. There is no need to turn the
PW001Weight Sensor on or activate it.
Installation
Place the PW001 Weight Sensor on a flat surface and ensure that all of the feet are making
contact with the flat surface. The PW001Weight Sensor will measure the Weightof the items
placed on top of the Weight Sensor.
Receiving data
To start receiving data from the PW001Weight Sensor, plug the Pulsa gateway into a power
source. Once the gateway is plugged in, PW001Weight Sensors in proximity will begin to appear
in the mobile app. Follow the in-app instructions to name, associate and organize the available
PW001Weight Sensors. If you are not able to complete the PW001Weight Sensor in-app
procedure, please email support@pulsasensors.com
Experience and data visualization
PW001Weight Sensor data and the complete service is experienced via the following:
Android Pulsa App
iOS Pulsa App
Website – www.pulsasensors.com
Website: www.pulsasensors.comTel: 415.997.5525 Email: support@pulsasensors.com
724 Brannan St., San Francisco, CA 94103
Advertisement
Table of Contents
Summary of Contents for AGALMIC PW001
- Page 1 PW001Weight Sensor on or activate it. Installation Place the PW001 Weight Sensor on a flat surface and ensure that all of the feet are making contact with the flat surface. The PW001Weight Sensor will measure the Weightof the items placed on top of the Weight Sensor.
- Page 2 AGALMIC FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the PW001 and is the answer not in the manual?
Questions and answers