Table of Contents
Advertisement
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
or "
" and "DEMO MODE" is set to "ON" (factory-
preset). Performing any operation during the
demonstration stops the demonstration temporar-
ily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic Demon-
stration activated on the LCD monitor or view-
finder.
DATE/TIME
Allows you to set the current date and time.
(
pg. 7)
To adjust the brightness of the LCD monitor,
!
is set to "
"
perform the following steps quickly (within approx.
1 second by each interval):
1) Select "LCD BRIGHT" in SYSTEM MENU. The
2) Press the BRIGHT Wheel
3) Rotate the BRIGHT Wheel
4) Rotate the BRIGHT Wheel
2 2
LCD BRIGHT
"BRIGHT ON" message appears.
normal screen.
bright level indicator
ate brightness is reached. After the BRIGHT
1
Wheel
is released, the indicator soon
disappears and adjustment is completed.
1
in to return to
1
to display the
f
.
1
until the appropri-
Advertisement
Table of Contents
