AIR GREAN AG-WF16L02M Owner's Manual

AIR GREAN AG-WF16L02M Owner's Manual

16” oscillating wall mount fan

Advertisement

SKU: AG-WF16L02M
READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in the manual are for reference only.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AG-WF16L02M and is the answer not in the manual?

Questions and answers

Summary of Contents for AIR GREAN AG-WF16L02M

  • Page 1 SKU: AG-WF16L02M READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the manual are for reference only.
  • Page 2 IMPORTANT SAFEGUARDS Caution Read Rules for Safe Operation and Instructions Carefully. WARNING 1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse the plug.
  • Page 3 RULES FOR SAFE OPERATION The rules about cord and plug as below 2. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. 3. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
  • Page 4 PART FIGURE Description Description Front Grill Rear Grill Spinner Motor shaft Blade Motor Plastic nut Note: All the pictures in this manual are for explanation purpose only. Any discrepan- cy between the real object and the illustration in the drawing shall be subject to the real subject.
  • Page 5 OPERATING INSTRUCTION The fan should be installed on a solid wooden or pillar which stands vertically to the floor. Caution : To prevent the fan from falling off, do not install it on walls less then 10 cm thick or made of materials that are easily damaged.
  • Page 6 USER SERVICING INSTRUCTIONS 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 3. Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize the fuse gradually and slowly, but not overexert.

Table of Contents