Ethan Allen VERONICA 09-6849B Quick Start Manual

ASSEMBLY, CARE, AND TROUBLESHOOTING

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the
other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the
type of bulb specified. Keep flammable materials away from bulb. DO NOT OPEN the product or alter the wiring in any
manner. Extension cord: Follow precautions provided with power cord.

UNPACKING:

Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of packaging materials.
ASSEMBLY, CARE, AND TROUBLESHOOTING
Tools Required For Assembly: Tools are not required.
Required: Light bulb is not included.
Parts Included: Refer to Figure 1.
A. Harp: Harp styles may vary.
B. Lamp Base.
C. Shade: Shade may be packed in separate carton.
D. Shade Finial.
E. Lamp Socket (attached, no assembly required).
F. Line Cord Plug.
Assembly Procedure: Refer to Figure 1.
1. Install Harp Part A onto Lamp Base Part B.
2. Install Shade Part C onto Harp Part A.
3. Install Shade Finial Part D onto Harp Part A.
4. Install Bulb into Lamp Socket Part E.
5. Remove Plug Cap, Part F from Plug.

Caring for and Cleaning your lamp:

1. To clean, wipe with a soft, dry cloth.
2. DO NOT USE cleaners, scouring pads, etc.
3. Unplug lamp and allow bulb to cool before changing bulb.

Troubleshooting:

Problem
Bulb does not light
In the event that the lighting fixture does not work after troubleshooting,
contact your local Ethan Allen Design Center.
©2016 Ethan Allen Global, Inc.
09-6849B VERONICA TABLE LAMP
TABLE AND FLOOR LAMP SAFETY,
Possible cause:
Bulb is burnt out or
damaged
Power to lamp is off
Lamp is not plugged
in
Correct by:
Replace bulb
Confirm power
is on
Confirm lamp is
plugged in
SAVE THESE INSTRUCTIONS
Page 1 of 1