Bertazzoni REF18WCPIXL/23 User Manual page 13

Built-in columns wine cabinet
Table of Contents

Advertisement

Available languages

Available languages

Are you sure?
Yes
No
Functions
46
+
°F
Settings
Off
For turning off the upper compartment
follow the same directions
Turning the upper and lower compartments
on again
To turn the unit on again press the button, the
display will turn on and the launch screen will
appear again with the temperatures measured
inside the wine cellar compartments. The wine
cellar will start to cool down until reaching the
set temperatures.
Restart the compartments.
In case you wish to turn the upper and lower
compartments on again.
Functions
46
+
°F
Settings
41
+
°F
+43
ON
+42
+41
°F
+40
OK
+39
Turn compartment
ON?
Yes
No
4) Touch the icon
Yes for confirming
the deactivation.
5) On the home
screen appears the
Functions
48
+
°F
icon
off, which
Settings
41
+
°C
indicates that the
lower compartment
is off.
.
Functions
48
+
°F
Settings
41
+
°C
1) Home screen.
To turn on the
lower compartment
on again, touch the
Functions
48
+
°F
icon
.
Settings
41
+
°C
2) Touch the On
icon.
3) Touch the Yes
icon.
Are you sure?
Yes
No
Functions
46
+
°F
Settings
41
+
°F
The same procedure is required if you want to
restart the upper cellar compartment
Switching off for long periods
During long absence periods it is recommended
to switch off the wine cellar by pressing the Unit
button
for three seconds and disconnecting
the electrical plug or the breaker controlling the
socket.
Completely empty the wine cellar, clean and
dry it and leave the doors and drawers partially
open to prevent unpleasant odors.
If at the first startup the Standby message
does not appear, but another message ap-
pears, it means that the appliance has al-
ready started the cooling process.
During the first startup, it will not be possi-
ble to use the Menu to modify the factory set-
tings until the preset temperature has been
reached. During the first startup, it will not be
possible to use the Menu to modify the fac-
tory settings until the preset temperature has
been reached.
Each time the appliance is switched on it goes
through a self-diagnosis procedure lasting
three minutes before completely starting up.
EN
4) Touch the Yes
icon for confir-
ming.
5) Turn on again
the lower
compartment.
Home screen will
open up.
.
Functions
48
+
°F
Settings
41
+
°C
13

Advertisement

Chapters

Table of Contents
loading

Table of Contents