Technical Data - AEG SFE68811AS User Manual

Table of Contents

Advertisement

14
www.aeg.com
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter "E" or by the earth
symbol
yellow.
2. Connect the wire coloured blue to
the terminal either marked with the
letter "N" or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
(E) is secure over the outer sheath.

9. TECHNICAL DATA

9.1 Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information is situated in
the rating plate, on the external or
10. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
or coloured green and
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.
mm
mm
mm
Hours
Volts
Hz
internal side of the appliance and in the
energy label.
marked with the symbol
.
household waste. Return the product to
your local recycling facility or contact
your municipal office.
*
873
540
549
12
230 - 240
50
with the

Advertisement

Table of Contents
loading

Table of Contents