Advertisement
4. OPERATION
4.1.
Unpack the unit and check that all parts are included and not damaged. Should you experience a problem contact your
supplier immediately.
4.2.
Position folder where it is to be mounted, ensuring that the handles fig.1.7 hang vertically over the front of the
floor space so as can be used without obstruction, use plates to steady during use fig.1.6.
4.3.
By using centre adjustment nut fig.1.4 ensure top and base plate are parallel, this may require adjustment from time to time.
4.4.
Release clamps fig.1.1 at either end of folder so that as mall test piece of sheet metal can be inserted between the top and base
plates. fig.1.3
4.5.
Position the test piece, adjust the top plate by use of clamps fig.1.1 lightly tighten, use a spanner to adjust cam fig1.2, so that
base and top plate are aligned.
4.6.
Ensure that there is even pressure on both ends.
4.7.
Raise the top folding plate fig.1.3 by lifting handles to create the fold. From this test, you will be able to determine how and where
the fold appears. When satisfied with the test results, proceed with the actual workpiece.
4.8.
By rotating the end clamps through the vertical axis, longer lengths of metal sheet can be folded, i.e. fold a section, unclamp, move
sheet, reclamp, fold second section etc.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
TS02 Issue 2 (H) 24/10/22
Advertisement
