Rehosin PD-BN300 User Manual

1: After pressing the 2 second multi-function button for a long time, the Bluetooth headset will
give a voice prompt to boot, and the boot will enter the pairing mode, and the red and blue lights
will flash alternately.
2: When the device searches for the Bluetooth name: PD-BN300, when the link command is
received, click the Bluetooth name to connect. After the connection is successful, the blue
indicator flashes for 5 seconds/time, and the headset emits a voice prompt.
3: Open the device music player, press the multi-function button once to enter the music
playing state, and then press the button once to enter the pause state.
4: Press the "VOL+/VOL-" button to increase/decrease the volume during playback, and the
headset will give a prompt (DI/DU) when the volume is increased or decreased to the limit.
5: Press the "VOL+" button to select the previous track while playing, and press the "VOL
—" button to select the next track.
6: When the headset is in the music playing state or in the standby state, if there is an incoming
call, the music should be disconnected into the incoming call ringtone and voice report mode;
press the multi-function button to connect the call to the call state once, the blue indicator
flashes for 5 seconds/ Then, press the multi-function button again to hang up the call; when you
need to dial the number of the last call, double-click the multi-function button to enter the last
number and redial.
7: Press and hold the multi-function button for 3 seconds, the red indicator light flashes 3 times
to enter the shutdown state, and the headset emits a voice prompt.
8: In the connected state, press and hold the multi-function button for 1.5 seconds and then
release it to enter the voice control mode.
User manual