THOMSON RCA DRC8310 User Manual page 23

ON-OFF
TV
DVD/VCR CABLE
SAT AUX
AUDIO
ZOOM EDIT ANGLE
OPEN
CLOSE
TIMER•GUIDE INFO
MENU
CLEAR
OK
AGAIN
ADVANCE
LIVE
VOL CH
MUTE GO
BACK
1 2 3
4 5 6
7 8 9
INPUT 0 ANTENNA
REVERSE PLAY FORWARD
RECORD
STOP PAUSE
The Universal Remote Control that came with
your DVD/VCR operates most RCA, GE, and
Proscan branded components.
Additionally, the remote is capable of being
programmed to operate many other brands and
models of components.
EDIT When playing a disc, displays the Info Display and Edit menu (see page 36 for details).
FORWARD Searches forward through the disc or tape.
GO BACK Returns you to the previous menu. When watching TV, goes back to the previous channel.
INFO Displays the on-screen Info Display (for details about the Info Display, go to page 45.)
INPUT Accesses the Input jacks on the Recorder (CABLE/ANTENNA INPUT, INPUT 1, and INPUT 2 on the front of the DVD/VCR). In TV mode, toggles through the
available input sources for some compatible TVs. If your DVD/VCR is on but you don't see a picture or menus on your TV, try pressing the TV button and then the INPUT
button to access the proper input jacks.
LIVE When the Main menu is on the screen, provides quick access to watch TV.
MENU When you're not playing a disc, accesses the DVD/VCR's menu. When you're playing a disc, accesses the disc's menu, if one is available.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OPEN•CLOSE Opens and closes the disc tray.
OK When a menu is on the screen, selects the highlighted item.
ON•OFF Turns the DVD/VCR on and off. In other modes (TV, SAT, CABLE, AUX, AUDIO), and if programmed, turns the component on and off.
PAUSE Pauses disc or tape playback or recording.
PLAY Begins disc or tape playback.
RECORD Records programming.
REVERSE Searches backward through a disc or tape.
SAT Puts the remote in Satellite mode in order for the remote to operate a satellite receiver. This remote is capable of being programmed to operate many brands of
satellite receivers. This remote is already programmed to operate most RCA, GE, and Proscan brand satellite receivers.
STOP Stops playback or recording.
TIMER•GUIDE Allows you to quickly access the Timer Recordings list or setup a new timer recording.
TV Puts the remote in TV mode in order for it to operate your TV. This remote is already programmed to operate RCA, GE, and Proscan brand TVs. This remote is capable
of being programmed to operate many brands of TVs.
VOL +/- Increases and decreases the volume level. Is capable of operating many brands of TVs or audio receivers.
ZOOM Enlarges the image on the screen so you can zoom in on details. To pan and scan after you've zoomed in on an image, use the arrow buttons. The Zoom feature
isn't available on all discs. Typically, it works with DVD discs and CD-Rs with JPEG fi les.
Explanation of Buttons
You can use this remote to operate the DVD/VCR, and to access the features available. The remote is also designed to
operate most RCA, GE, and Proscan components (TVs, VCRs, DVD players, audio components and satellite receivers).
If you have another brand, you can program the remote control to operate those components (go to page 23 for
instructions).
The descriptions that follow describe how each button works when operating the DVD/VCR. Many buttons will perform
different functions depending upon the type of disc and menu functions of the disc.
0-9 (Number buttons) Use the number buttons to input information such as chapter numbers, track numbers, to make
selections on some menu screens, and/or to change channels.
Arrow buttons (up, down, left, right) Use the arrow buttons to highlight options that appear on the screen (the
arrow buttons move the highlight in the corresponding directions—up arrow moves the highlight up; left arrow moves the
highlight left, etc.).
ADVANCE When playing a disc or tape, moves forward approximately 30 seconds. Not applicable for VCDs or mp3
fi les.
AGAIN Accesses the Scene Again™ feature—replays the last several seconds (approximately 10) of the DVD disc or
tape you're playing. Not applicable for VCDs or mp3 fi les.
ANGLE Accesses various camera angles that might have been added to a pre-recorded disc when it was created. Not
available on all discs.
ANTENNA Acts like a TV/VCR button that is on most VCRs—on your DVD/VCR switches the RF Output between the
TV/cable signal and the DVD/VCR output. In SAT mode, functions as a TV/SAT button for an RCA satellite receiver.
AUDIO Puts the remote in audio mode to operate a component, such as an audio receiver or amplifi er, that you've
programmed to work with this button.
AUX Puts the remote in auxiliary mode to operate a component (such as a cable box, VCR, DVD player, satellite
receiver, or audio receiver) that you've programmed to work with this button.
CABLE Puts the remote in cable box mode so the remote operates a cable box that you've programmed to work with
this button.
CH+ Advances to the next chapter or track when you're playing discs. Goes to the next channel in the channel list when
watching TV.
CH – When playing a disc, goes to the beginning of the current chapter or track, unless you're within the fi rst minute
of a chapter or the fi rst 15 seconds of a track—then you'll skip to the beginning of the preceding chapter or track. When
watching TV, goes to the previous channel in the channels list.
CLEAR During playback, removes on-screen menus and displays.
DVD/VCR Turns on the DVD/VCR and puts the remote in DVD mode so it operates the DVD/VCR.
Graphics contained within this publication are for representation only.
Chapter 2: The Remote Control
21