MOSSLOO XJ0808 Instruction Manual

Stick-On Stand
Bluetooth Speaker
®
Instruction Manual
Functions:
1. LED Indicator
2. Micro-USB input port
3. ON/OFF Switch
4. Suction cups
What's included:
1 x Bluetooth® Speaker
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
Tech Specifications
• Playing time: up to 1 hr at max volume
• Charging time: up to 1.5 hr
• Pairing Name: "Stick-On BT"
Instructions:
(Be sure to fully charge the speaker before
using for the first time).
1. Charging the Speaker
• Connect the provided charging cable to a
power source and to the micro USB port on
the speaker (2).
The LED indicator light will glow red when
charging and turn off when fully charged.
Bluetooth Setup:
2. ®
• Turn ON/OFF switch to ON position, LED
Indictor will then flash BLUE.
• Turn on the Bluetooth function on mobile
device, Select "Stick-On" pairing name.
• LED will turn solid BLUE if successfully
paired
* Speaker will automatically pair if the mobile
device has been paired before.
• Turn ON/OFF switch to OFF position to
turn off the device
3. Suction Cups:
• Use the suction cups to secure the
bluetooth speaker to any flat surfaced
object (e.g. Your phone or tablet)
SAFETY PRECAUTIONS:
• WARNING-When using this product, basic
precautions should always be followed:
1. Read all the instructions before use.
2. Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
3. The unit's full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
4. To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its
output rating. Overload outputs above
rating may result in a risk of fire or injury.
7. Do not use the device if damaged or
modified.
8. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
9. Do not disassemble the device. For
repairs, seek a qualified service
professional. Incorrect reassembly may
result in a risk of fire or injury.
10. Do not expose the device to fire or
excessive temperature. Exposure to fire
or temperatures above 104°F may cause
explosion.
11. Ensure that qualified service professionals
use only identical replacement parts to
ensure product safety
MADE IN CHINA