Pen Generations ADP-611 Quick Setup Manual

How to use the Android application
■ User can do Bluetooth pairing with simple steps once the pen already registered as
bluetooth device
1.Click the option button 2. Click the Pen connection 3. Select your device 4. Message for success to
button connect between the pen
and the Android mobile device.
■ Check the connection between the pen and the Android mobile device. The green LED keeps
turn-on status when the pen is connected correctly
■ User can write a pen to exclusive notes or can view the saved note on the Android mobile device
Function
Function and Mode
■ Transmission in real time : Real time transmission the written contents by the digital pen from
exclusive notes to the Android mobile device or computer in real time.
■ Transmission after saving : The digital pen can save the written contents when it is not paired in Bluetooth.
NOTE) To save the written contents, the pen should keep the turn-on status when it is written but it is no
problem to save when the pen is not paired with Bluetooth.
LED Mode
1. Top LED(RED) 2. Top LED(GREEN)
1. Top LED(RED) : Blinking : Warning the low battery or memory full
Keep on : Warning the discharged battery level or pen working error
2. Top LED(GREEN) : Blinking : Transmission after saving / Keep on : Transmission in real time
How to install the Android app.
■ Search the app. named PenHub using the keyword "ADP-611" in Google Play and please
download and install the PenHub.
■ Supported OS version
- The PenHub can work under Android OS ver. 3.0(Honey comb) to 4.4(Kitkat) with BLE H/W
How to Bluetooth pairing(Registering) in Android mobile device.
1. Run the PenHub application
2. Put the ADP-611 to search mode by turn-o and turn-on again.
3. Click the option button 4. Click the Pen connection button 5. Tab the "Pen connection(Auto)"
11
11
6. Select the ADP-611 7. Input the PIN code as "0000" 8. Done the pairing
9. Please turn o and on after Bluetooth pairing(Registering)
Unpacking
01. Digital Pen 611
02. Starter Note A5
03. Micro USB Cable
04. Pen Cap
05. Re ll / Stylus
Specification
Model ADP-611
Weight 30g
Communication BLE
Operating angle -20 ~ +40 degree
External interface Micro USB Cable for charging
Size 165 x 12.4 x 14mm
Battery Li-Polymer
Charging method Standard USB charging
Caution
01. Do not disassemble or otherwise attempt to change the form of the Digital Pen 611.
02. Do not crush, puncture or shred the Digital Pen 611.
03. Do contact the C/S center when the Digital pen doesn't work.
04. Do not insert any other writing thing except supplied re ll
05. The pen is not working under
- turned o
- exceeded from the operation degree
- put hand or something over the front of the pen(optical sensor)
06. Do not choke down the pen cap or re ll.
07. Do pay attention not to get pierced by a re ll
11
08. Do not let the pen come in contact with liquids and do not dry with heater by force
09. Do not place the pen in or near a heat source.
10. Do use the pen in the condition of room temperature.
11. Do not use the chemicals such as alcohol to clean the pen. Do use a piece of soft cloth.
12. Do not use incompatible charger. Misuse or use of incompatible charging device could
result in damage to the equipment and a possible risk of re, explosion, or leakage,
leading to serious injuries, damages to your pen.
* Wireless device encountered interference from other devices.
* Don't attempt to use the battery improperly or replace yourself – you may damage the battery,
which could cause overheating and injury.
* Do dispose of the battery in accordance with local regulations. Never dispose of battery in a re
because it may explode.