Page 2
Page 2 Instruction Manual for PHV-200 (V334) 05/12/2014...
Page 3
Page 3 Instruction Manual for PHV-200 (V334) 05/12/2014 BEFORE OPERATION CHECK THE FOLLOWING Check the accuracy sheet and attachment Remove the protective layers of grease and rust preventive before moving the slides. Lubricate all slide ways and lubrication points After setting the vice to the work piece size check that the lock pin is securely through the side of the vice and the centre block.
Page 4
Page 4 Instruction Manual for PHV-200 (V334) 05/12/2014 BEFORE INSTALLING VICE ON THE TABLE 1. Insure that the bottom of the vice the table and the Tee slots are clean and free of swarf. 2. Secure the tee slot blocks provided into the base of the vice with the Allen head screws.
Page 5
Page 5 Instruction Manual for PHV-200 (V334) 05/12/2014 OPERATING INSTRUCTIONS 1. CLAMPING WITH HYDRAULIC POWER a. Insure that the four lines on the hydraulic spindle 34 are visible. To bring them into full view hold the cylinder 35 body and turn the spindle 32 counter clockwise.
Page 6
Page 6 Instruction Manual for PHV-200 (V334) 05/12/2014...
Page 7
Page 7 Instruction Manual for PHV-200 (V334) 05/12/2014...
Page 8
Page 8 Instruction Manual for PHV-200 (V334) 05/12/2014...
Page 9
Page 9 Instruction Manual for PHV-200 (V334) 05/12/2014...