Download Print this page
Litelink ACC-1004-XLR Operating Instructions

Litelink ACC-1004-XLR Operating Instructions

Amplified intercom speaker

Advertisement

Quick Links

WARRANTY
All fiber optic transmission systems, products and accessories
manufactured by Liteway, Inc. and its subsidiaries are fully tested
prior to shipment and are warranted against defective materials
and workmanship for a period of five full years from the date of the
original shipment. Should a problem occur, a Return Material
Authorization Number (RMA) must be obtained from Liteway Inc.
at (516) 931-2800 and the item returned to Liteway, Inc. 166
Haverford Road, Hicksville, NY 11801, USA, prepaid. Liteway Inc.
will then, at its option repair or replace the defective item.
Liteway, Inc. maximum liability under this warranty is limited to the
cost of the defective item only. No contingent liabilities of any kind
are either assumed or implied.
Any items returned to Liteway, Inc. that have been misused,
abused, damaged, modified, connected or adjusted in any way
contrary to the instructions furnished by Liteway, Inc. or repaired
by unauthorized personnel will not be covered by this warranty.
Any non-warranty repairs required will be quoted at the current
rate for such services.
!
Important Notices
CAUTION !
AVOID DIRECT EXPOSURE TO BEAM.
Some -7,-8, and -9 models use laser diodes. These solid-state
laser diodes are located in the optical ports of these units. Laser
diodes produce invisible radiation that may be harmful to human
eyes. Never look directly into the optical port of any fiber optic
unit designed to operate with single-mode optical fiber.
NOT FOR LIFE SUPPORT SYSTEMS
Liteway, Inc. does not authorize or warrant any of its products or
accessories for use in critical life support systems or applications
of any kind.
© Copyright 2021 Liteway, Inc.
107744 Rev K
OPERATING INSTRUCTIONS
Amplified Intercom Speaker
Model ACC-1004
Model ACC-1004-XLR
Technical Specifications
Audio Output Level
15 watts maximum
Audio Output Distortion
10% or less at full output
Operating Current
1.5 Amps at full output, 0.2A standby
Input Voltage
10 to 16 Volts DC
Temperature Range
0º to 50ºC
Physical Size (mm)
4.5"(115)H x 5.5"(139)W x 2.5"(63.5)D
Input Impedance
3 to 16 Ohms
Input Audio Level
1.5 VPP max
Power input fuse
2 Amps
All specifications are subject to change without prior notice.

Advertisement

loading

Summary of Contents for Litelink ACC-1004-XLR

  • Page 1 Liteway, Inc. and its subsidiaries are fully tested prior to shipment and are warranted against defective materials Model ACC-1004-XLR and workmanship for a period of five full years from the date of the original shipment. Should a problem occur, a Return Material Authorization Number (RMA) must be obtained from Liteway Inc.
  • Page 2 In IN EITHER CASE DO NOT APPLY MORE THAN 16 VOLTS DC OR the case of the ACC-1004-XLR a power connector and an in-line fuse DAMAGE TO THE UNIT MAY OCCUR.! holder for use with the INCX-4101 are also provided.

This manual is also suitable for:

Acc-1004