MAGIC TIME Carnivolt 90505 Instruction Manual

Batteries Installation :

The operation requires TWO "AA" size batteries for the dinosaur and Two "AA" size batteries for the transmitter.

Install batteries to the dinosaur:


Carefully remove product from package.

Locate the battery compartment on the bottom of the dinosaur.

Unscrew and remove the battery cover as in indicated in Diagram A point #1.

Then fill TWO "AA" size batteries in.

Install batteries to the transmitter:


Unscrew the battery compartment door on the back of the transmitter.

Slide out the door from the battery compartment.

Insert 2 pieces of "AA" size batteries to the battery compartment according to the polarity direction as engraved
inside.

Close the battery compartment door by the screw.

Running the R/C dinosaur:


Step 1 : Install the batteries on both the dinosaur and transmitter as mentioned above.

Step 2 : Turn on the switch on the dinosaur. The switch is located at the bottom of the dinosaur as illustrated in
INSTRUCTION MANUAL
#90505 R/C Carnivolt
Diagram A
OFF/ ON Switch
1. Unscrew and remove the
battery cover.