Table of Contents
Advertisement
2.3
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VK192 Series LCD monitor is specially designed
for VESA wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes (Figure 1).
3.
Use a screwdriver to remove the two (2) screws on the arm (Figure 1), then
slide out the arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2-2
AC-IN
DVI
Figure 1
Figure 2
Rubbers in the
screw holes
VGA
AUDIO IN
USB
Arm screws
Arm/base
Chapter 2: Setup
Advertisement
Table of Contents
