Page 1
PRESENTED BY JPBOWLIN.COM 817.332.8116 J.P. Bowlin is a quality-driven Calibration Company that has provided calibration, repair and sales of all types of weighing and measurement products since 1931.
Although the tachometer is able to achieve higher initial set-up and operation; the information contained measurements than what is listed, the master wheel herein will aid you in operating your MT-200 safely and has a maximum speed limitation of 5000 ft/min (for safety reasons).
OPERATION 3. Press the POWER button to turn the tachometer on. 4. Select meters/minute (m/M), yards/minute (Y/M), Non-Contact Measurements inches/minute (I/M), feet/minute (F/M), meters (m), Measuring revolutions per minute or total revolutions. yards (YRd), feet (FT), or inch (IN) depending on which 1.
• Measuring distance may be to short. The minimum distance for non-contact measurements is 12.7cm DIMENSIONS AND SPECIFICATIONS S P E C I F I C A T I O N S MODEL MT-200 Display 5 digit 0.47”(12 mm) height LCD Revolutions per Minute (RPM) Non-Contact: 6.0 - 99,999 Contact: 6.0 - 25,000...
WARRANTY LIMITED EXPRESS WARRANTY: The manufacturer warrants, to the original purchaser of new products only, that this product shall be free from defects in workmanship and materials under normal use and proper maintenance for one year from the date of original purchase. This warranty shall not be effective if the product has been subject to overload, misuse, negligence, or accident, or if the product has been repaired or altered outside of the manufacturer's authorized control in any respect which in the manufacturer's judgment, adversely affects its condition or operation.