Eco Saving Plus; Off Timer; Pc/Av Mode; Source Detection - Samsung S24F354FH Series User Manual
Hide thumbs
Also See for S24F354FH Series:
- User manual (46 pages) ,
- User manual (44 pages) ,
- User manual (45 pages)
Table of Contents
Advertisement
Eco Saving Plus
Reduce energy consumption compared to consumption at the maximum brightness level.
― This option is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
•
Off: Deactivate the
function.
Eco Saving Plus
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: Saves up to 25 % energy compared to the maximum brightness.
•
High: Saves up to 50 % energy compared to the maximum brightness.
Off Timer
Timer: Turn on
mode.
Off
Off Timer
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
Turn Off
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to MENU
and set
System
Off Timer
is in
mode.
Dynamic Contrast
is enabled.
is enabled.
is set to On.
is set to automatically activate 4 hours after the
Off Timer
to Off.
PC/AV Mode
Set
to AV. The picture size will be enlarged.
PC/AV Mode
This option is useful when you view a movie.
•
Set to
when connected to a PC.
PC
•
Set to
when connected to an AV device.
AV
― This function is only available in
mode.
Analog
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in
HDMI/DisplayPort
mode and the screen says
activates, press the JOG button to display the function-button screen and then select the
select
or AV.
PC
Source Detection
Select either
or
as the method to recognize input signal.
Auto
Manual
Key Repeat Time
Control the response rate of a button when the button is pressed.
sec, or
can be selected. If
Acceleration,
1
2 sec
when a button is pressed.
Check Signal Cable
or power saving mode
is selected, a command responds only once
No Repeat
icon. You can
35
Advertisement
Table of Contents
