Operation - RIDGID HD16100 Owner's Manual

ASSEMBLY
POSITIONING DETACHABLE BLOWER
(POWERHEAD ASSEMBLY) (Fig. 5)
1. To Remove the Detachable Blower from the
Powerhead Assembly:
Detachable Blower Latch under the Detachable
Blower Handle and lift the Detachable Blower (A)
off the Powerhead Assembly (B) of the Vac.
2. To Replace the Detachable Blower onto the
Powerhead Assembly: Position Detachable Blower
(A) above the indented area of the Powerhead
Assembly (B). Rotate the Detachable Blower (A)
down until the travel of the unit stops.
3. Lightly press down on the Detachable Blower
Handle until you hear the "snap" of the Detachable
Blower Latch engaging the Detachable Blower (A).
The Detachable Blower is now latched to the
Powerhead Assembly.

OPERATION

WARNING:
!
• Do not leave Vac running while unattended - you may fail to notice important signs indicating abnormal
operation such as loss of suction, debris/liquid exiting the exhaust, or abnormal motor noises.
Immediately stop using Vac if you notice these signs.
• Do not leave Vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables.
liquids or in areas with flammable gases, vapors, or explosive/airborne dust. Flammable liquids,
gases, and vapors include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol,
and aerosol sprays. Explosive dusts include: coal, magnesium, aluminum, grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not leave sawdust or rags with stain or polyurethane residue inside Vac. Empty drum after picking up
these potentially self-heating materials.
WARNING:
!
• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.
• Do not handle plug, switch, or Vac with wet hands.
• Unplug Vac before servicing. If your Vac is not working as it should, has missing parts, has been
dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center or call
customer service.
• When using an extension cord, use only outdoor-rated cords that are in good condition. Do not allow the
connection to come into contact with liquid.
CAUTION:
!
Vac/Blower for extended time or in a noisy area.
Press down on the
To reduce the risk of fire, explosion, or damage to Vac:
To reduce the risk of electric shock or injury:
To reduce the risk of hearing damage, wear ear protectors when using the
6
Detachable Blower Handle
(A)
Detachable
Blower
Latch
(B)
Do not operate Vac near flammable
Fig. 5