Device Preferences - Toshiba 65 UA32 Series Operating Instructions Manual

Speaker: Turn this option on if you want to hear
the audio commentary through the TV speakers.
Headphone: Turn this option on if you want to
route the sound of the audio commentary to the
TV's headphone output.
Volume: Adjust the volume level of the audio
commentary.
Pan and Fade: Turn this option on if you want to
hear the audio commentary more clearly, when it
is available through broadcast.
Audio for the Visually Impaired: Set the audio
type for visually impaired. Options will be available
depending on the selected broadcast.
Fader Control: Adjust the volume balance
between the main TV audio (Main) and audio
commentary (AD).
Captions: Configure the settings for the captions.
You can set the language, text size and style
using the options of this menu. Highlight Display
and press OK to turn on or off the sample caption
demonstration.
Text to speech: With text-to-speech feature, your
TV can convert written text into voice text to help
visually impaired people listen to the information
they are unable to read. You can choose your pre-
ferred engine, configure the engine settings, and
speech rate, play a short demonstration of speech
synthesis, and display default language status using
the options of this menu.
High Contrast Text: Increase the contrast of the
menu options and texts to make them easier to read.
Highlight this option and press OK to turn this
feature on or off.
Restart: A confirmation message will be displayed,
select Restart to proceed with restarting. The TV will
switch off/on first. Select Cancel to exit.

Device Preferences

About: Check for system updates, change the device
name, reset the TV to the factory defaults and display
system information such as network addresses,
serial numbers, versions, etc. You can also display
legal information, manage advertisings, display your
advertising ID, reset it and turn on/off the personalised
advertisings based on your interests.
Factory reset: Reset all TV settings to the factory
defaults. Highlight Factory reset and press OK.
A confirmation message will be displayed, select
Factory reset to proceed with resetting. A further
confirmation message will be displayed, select
Delete everything to factory reset the TV. The TV
will switch off/on first and the initial setup will start.
Select Cancel to exit.
Note: You may be asked to enter a PIN to proceed with the
reset operation. Enter the PIN you have defined during the
initial setup. If you didn't set a PIN during the initial setup,
you can use the default PIN. The default PIN is 1234.
Netflix ESN: Displays your ESN number. ESN
number is an unique ID number for Netflix, created
especially to identify your TV.
TV Life Time: Your TV's lifetime information is dis-
played.
Date & Time: Set the date and time options of your
TV. You can set your TV to automatically update
the time and date data over the network or over the
broadcasts. Set corresponding to your environment
and preference. Disable by setting as Off if you want
to manually change the date or time. Then set date,
time, time zone and hour format options.
Timer
Power On Time Type: Set your TV to turn on by
itself. Set this option as On or Once to enable a
power on timer to be set, set as Off to disable. If
set as Once the TV will turn on only once at the
defined time in Auto Power On Time option below.
Auto Power On Time: Available if the Power On
Time Type is enabled. Set the desired time for your
TV to come on from standby using the directional
buttons and press OK to save the new set time.
Power Off Time Type: Set your TV to turn off by
itself. Set this option as On or Once to enable a
power off timer to be set, set as Off to disable. If
set as Once the TV will turn off only once at the
defined time in Auto Power Off Time option below.
Auto Power Off Time: Available if the Power Off
Time Type is enabled. Set the desired time for your
TV to go to standby using the directional buttons and
press OK to save the new set time.
Language: Set your language preference.
Keyboard: Select your keyboard type and manage
keyboard settings.
Inputs: Show or hide an input terminal, change the
label for an input terminal, and configure the options
for HDMI CEC (Consumer Electronic Control) function
and display the CEC device list.
Power
Sleep Timer: Define a time after which you want
your TV to enter sleep mode automatically. Set as
Off to disable.
Picture Off: Select this option and press OK to turn
the screen off. Press a button on the remote to turn
the screen on again. Note that you can not turn the
screen on via the Volume +/-, Mute and Standby
buttons. These buttons will function normally.
No Signal Auto Power Off: Set the behaviour of
the TV, when no signal is detected from the currently
English - 25 -
(**) Limited Models Only