Summary of Contents for Alpaca IF-2018F
- Page 1 IF-2018F ELECTRIC FIREPLACE User Manual SAVE THIS MANUAL You will need this manual for safety instructions, operation procedures, and warranty. Put it and the original invoice in a safe, dry place for future reference. - 0 -...
- Page 2 The appliance will have to be reset prior to continuing use. To reset the overheat protection safety device, turn all controls, plug the appliance back and turn on TECHNICAL SPECIFICATIONS Model# IF-2018F Rate Voltage AC 120V, 60Hz Rate Amps 11.67Amos...
- Page 3 ELECTRIC FIREPLACE INSTALLATION Plugging in the heater NOTE: 1. This heater is for use on 120 Volts. 2. A 15AMP circuit is required to operate this appliance. If the breaker trips when the appliance is running, you may need to move the appliance to another location or unplug other appliances that are on the same circuit 3.
- Page 4 OPERATING INSTRUCTIONS NOTE: 1. When you first turn the heater on, it may emit a slight but harmless odor. This odor results from certain oils or greases being heated as the appliance is used for the first time. This odor is perfectly safe and will stop shortly, it will not reoccur after the first operation of the appliance.
- Page 5 WARRANTY Thank you for purchasing this product. These products have been made to demanding high quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. For service within the warranty period, please contact the store where the product was purchased.
Need help?
Do you have a question about the IF-2018F and is the answer not in the manual?
Questions and answers