Range Road RR560 Operator's Manual

Mini tracked dumper

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Save This Manual for Future Reference

Original Instruction

Mini Tracked Dumper

Operator's Manual

MODEL NUMBER :

SERIAL NUMBER :

Both model number and serial number may be found on the main label.

You should record both of them in a safe place for future use.

FOR YOUR SAFETY

READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE

OPERATING MACHINE

Table of Contents

Need help?

Do you have a question about the RR560 and is the answer not in the manual?

Questions and answers

Summary of Contents for Range Road RR560

Page 1 Save This Manual for Future Reference Original Instruction Mini Tracked Dumper Operator’s Manual MODEL NUMBER : SERIAL NUMBER : Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use. FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE...
Page 2: Specifications
The four-speed gearbox, three forward and TABLE OF CONTENTS one reverse, lies at the heart of the unit. It is oversized so as to manage safely the huge Introduction torques generated by the engine. Thanks to Specifications its efficient reduction gearing, it is capable of Symbols moving around in every situation and bearing any load.
Page 3 SYMBOLS The exhaust fumes are dangerous, containing carbon monoxide. T h e r a t i n g p l a t e o n y o u r m a c h i n e m a y Staying in the environment can show symbols.
Page 4: General Safety Rules
Protect eyes, face, and head from objects that SAFETY may be thrown from the unit. Always wear General Safety Rules safety goggles or safety glasses with side shields when operating. Understand Your Machine Wear appropriate hearing protection. Read this manual and labels affixed to the Always keep hands and feet away from all machine to understand its limitations and moving parts during operation.
Page 5 on the unit. Transporting or performing To avoid sparking or arcing, keep grounded maintenance or service on a machine with its conductive objects – such as tools – away switch on invites accidents. from exposed, live electrical parts and connections. These events could ignite fumes I f t h e m a c h i n e s h o u l d s t a r t t o v i b r a t e or vapors.
Page 6: Specific Safety Rules
Speciﬁc Safety Rules On soft ground, drive at the first forward/ reverse gear. Do not rapidly accelerate, turn sharply or stop. Thoroughly inspect the area to be worked. Keep the working area clean and free of debris Pay the utmost attention when working on to prevent tripping.
Page 7: Unpacking The Container
UNPACKING THE CONTAINER Use the screwdriver and hammer to open all the side locks. M in i-D um pe r Q T Y : pe r M in i Tr ac ke d D um G W : 2 6 4 .0 k N W : 2 2 8 .0 k M in ira up en du m pe...
Page 8: Contents Supplied
CONTENTS SUPPLIED The mini tracked dumper comes partially assembled and is shipped in carefully packed package. After all the parts have been removed from the package, you should have: Save This Manual for Future Reference Original Instruction Mini Tracked Dumper Operator’s Manual MODEL NUMBER : SERIAL NUMBER :...
Page 9 3. Insert the shorter control lever into the 7. Install the mounting bracket base with two longer lever. Align holes and fasten with M10×30 bolts and washers. M8×40 hex bolt, washers and nut. M8×40 (×1) M10×30 (×2) M8 × 40 ×...
Page 10: Know Your Machine
KNOW YOUR MACHINE Features and Controls Engine Switch Throttle Control Right Steering Lever Clutch Control Lever Left Steering Lever Hopper Tipping Handle Gear Selection Lever Track Gearbox Gas Spring Assistance MINI TRACKED DUMPER...
Page 11 Recoil Starter Handle Throttle Control Choke Control Fuel Shut-Off Valve Gear Selection Lever Gas Spring Assistance The gear selection lever has 4 positions: 3 The gas spring assistance provides support forward speeds and 1 reverse. To change when lifting and lowering the hopper. speeds, move the speed shift lever to the Engine On/Off Switch desired position.
Page 12: Operation
The engine must be off and allowed to cool Never use choke to stop engine. at least two minutes before adding fuel. Remove the fuel filler cap and fill the tank. (See engine manual for fuel capacity, fuel Clutch Control Lever recommendation, and location of fuel cap.) Squeeze the control lever, clutch engaged.
Page 13 CLOSED OPEN Move the choke lever to the CLOSED turn. When the machine is fully loaded, more position. pressure is required. If the engine is hot, closing the choke is not The power trackbarrow has a maximum necessary. capacity of 660 LBS. However, it is advisable to assess the load and adjust it according to the ground on which the machine will be used.
Page 14: Maintenance
MAINTENANCE S u d d e n s t o p p i n g a t a h i g h speed under a heavy load is not recommended. Engine damage may Maintaining your mini tracked dumper will result. ensure long life to the machine and its components.
Page 15 Once tightness is set, return the jam nut If the above adjustment does not create against the handle to hold the cable in enough cable tension, follow the steps below: place. Loosen the jam nut by turning it counter clockwise with 12mm wrench. Tighten or loosen the cable by turning the cable adjustment nut clockwise or counter Jam Nut...
Page 16 Lubrication Replacing Drive Belt General Lubrication Remove the belt cover for gearbox puiley. Lightly lubricate all moving parts of the machine at end of the season or every 25 operating hours. M8×16 Gearbox Lubrication Belt Cover The gearbox is pre-lubricated and sealed at the M8×20 factory.
Page 17 Tightening Tracks W ith u s e, tra c ks t e nd t o l o o s en . Wh en operating with loose tracks, they tend to slip over the driving wheel causing it to jump its housing, thus damaging wear to the housing.
Page 18 Replacing Tracks Check the condition of the tracks periodically. If any track is cracked or frayed, it should be Track Protection Guard replaced as soon as convenient. 1. Lift up the hopper and insert a support rod for safety purposes. 2.
Page 19 STORAGE If the mini tracked dumper will not be used for a period longer than 30 days, follow the steps below to prepare your unit for storage. Drain the fuel tank completely. Stored fuel containing ethanol or MTBE can start to go stale in 30 days.
Page 20: Troubleshooting
TROUBLE SHOOTING Problem Cause Remedy 1. Attach spark plug wire securely to spark plug. 1. Spark plug wire disconnected. 2. Fill with clean, fresh gasoline. 2. Out of fuel or stale fuel. 3. Throttle must be positioned at choke 3. Choke not in open position. Engine fails to for a cold start.
Page 21: Parts Schedule
PARTS SCHEDULE MINI TRACKED DUMPER...
Page 22: Parts List
PARTS LIST Description Q'ty Description Q'ty Handle frame assembly (left) Support plate (left) Plate Chassis Safety control handle Brake spring Tensioner pulley cable Support plate (right) Handle sleeve Wheel axle mounted plate Throttle lever Lower belt cover Throttle cable Rubber track ON/OFF Switch Guard plate (right) Handle frame assembly (right)
Page 23 PARTS LIST Description Q'ty 77 Hex bolt M10x25 Carriage bolt M6x20 Flat washer 6 80 Lock nut M6 Spring washer 6 Hex socket bolt M6x45 Hex socket bolt M6x50 84 Hex socket bolt M8x25 Hex bolt M10x45 Hex bolt M8x20 Hex socket bolt M10x25 Hex bolt M8x25 Hex bolt M6x12...