Related Manuals for Parrot Products S1008CC
Summary of Contents for Parrot Products S1008CC
- Page 1 Paper Shredder 8 Sheets 5 x 47mm Cross Cut - S1008CC User Manual Tel: (RSA) 010 140 4900 / Email: sales@parrot.co.za www.parrot.co.za...
-
Page 2: Safety Instructions
Safety Instructions Read instructions before use. Do not spray or keep any aerosol products in or around the shredder. Avoid touching the document Keep loose clothing or jewelry feed opening with hands. away from the paper entry slot. Product is not intended for use by Avoid getting hair near the children (product is not a toy). -
Page 3: Specifications
Contents • Installation • Operation • Maintenance • Troubleshooting Specifications Security level Medium Security (P3) Continuous run time 2-3 minutes Cut size 5 x 47mm Dimensions 306 x 170 x 425mm Auto start/stop Cut type Cross cut Paper feed width 220mm Auto forward / reverse Shred capacity... -
Page 4: Operation
Operation Control Switch Using the switch located on the unit, select one of the following settings by sliding the switch either left or right. (FIGURE 2) AUTO / ON: This setting allows the shredder to be automatically started by insert ing paper into the feed slot. -
Page 5: Maintenance
Maintenance Warning: Failure to properly maintain your shredder will void the warranty. Oil the shredder blades every month with Parrot Shredder Oil. Follow oiling procedure below (FIGURE 3). This ensures the cutting blades run smoothly. Oiling procedure: 1. Turn off shredder. 2. -
Page 6: Troubleshooting
2) With stubborn situations where the reverse function does not help, you may loosen the jammed paper with Parrot Products shredder oil (nothing aerosol). Start by drizzling oil into the feed slot where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return the shredder back to Auto-On mode. - Page 7 Troubleshooting Power switch in auto position Use thick paper stock or greeting card to push the jam through • The shredder is constantly running while in “Auto (On)” mode. 1) It is possible that the activation sensor, which starts the shredder, has become blocked with paper. Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly in the center of the feed slot, while applying force to help push the jammed paper through.