Scanning Dot Matrix Printer Paper - Visioneer PATRIOT PD40-U User Manual

®
V P D40
ISIONEER ATRIOT
2. Flip up the paper guides and adjust them to the width of the documents you are scanning. Extend the input
and output trays.
3. Load the documents face down with their tops into the Automatic Document Feeder.
4. You can now scan the documents using the scanner buttons, OneTouch, or one of the other scanning
interfaces.

Scanning Dot Matrix Printer Paper

®
With the Visioneer Patriot D40 you can scan dot matrix printer paper without removing the perforated sides from
the page.
1. Separate the pages so that you have a stack of single pages.
Do not place a stack of connected paper in the input tray. The paper will tear when the separation roller
attempts to separate the current page from the rest of the stack. If you want to scan a long document of dot
matrix paper, try placing the document stack on the desk behind the input tray. Close the input tray
extension and place the leading page in the input tray.
16
L D S
OADING OCUMENTS TO CAN
S U ' G
CANNER SER S UIDE