Summary of Contents for i360 TT-283PC
- Page 1 CLASSIC TURNTABLE WITH STEREO RADIO RECEIVER AND PC ENCODING TT-283PC INSTRUCTION MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS: 1. Read the instructions. All uses guidelines must be read before starting the device. 2. Keep the instructions for future use. 3. Attention, use and security guidelines must be respected. 4. The device must not be used near water or be put in contact with moisture. 5. -
Page 3: Location Of Controls
CAUTION: USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. LOCATION OF CONTROLS 1) DUST COVER 2) DIAL POINTER 3) LEFT SPEAKER 4) POWER OFF/FUNCTION SELECTOR... -
Page 4: Line Out Connection
SET THE FM MODE SELECTOR TO “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE FM- STEREO LED INDICATOR WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS BEING RECEIVED HINTS FOR BEST RECEPTION:- FM: THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION. - Page 5 More information as well as open source code can be found on the provided CD or on the website at: http://audacity.sourceforge.net/ INSTALL THE USB DRIVE 1. Use the included USB cable to connect the turntable to your computer. 2. Your computer will detect the unit as a “USB PnP Audio Device” & start to install USB drivers for it automatically.
- Page 6 4. In the Sound Recording field, click the pull down menu to select “USB PnP Audio Device” as Default device of sound recording. 5. Click the Volume button under the Sound recording tab to open ”Recording Control“ interface; 6. Adjust the line in volume to a level without distortion. You can play a record on the turntable and use the Sound Recorder to record a short clip of music for testing.
- Page 7 3. Click “Preferences” at the bottom of the Edit menu, you can set the Devices, Quality, and various settings here.
- Page 8 4. Adjust the input and output volume by sliding the Input and Output Volume bars. Output Volume Input Volume 5. Click the record button to start recording, left and right tracks will show on your computer screen. If you cannot see the sound waves appear on the Interface when recording, adjust the Input volume bar.
- Page 9 Once you have finished recording, make sure you save your recorded music to the computer. Click File menu and move down to “Export” to convert the file to WAV format or MP3 format. Click on WAV or MP3 format you want to save the music as in pull down menu of “Save as type” field, and you will be asked for the file name of your recorded music.
-
Page 10: Specification
RECYCLING, MATERIAL RECYCLING OR OTHER FORMS OF RE-UTILIZATION OF OLD APPLIANCES, YOU ARE MAKING AN IMPORTANT CONTRIBUTION TO PROTECT OUR ENVIRONMENT. PLEASE CONTACT YOUR LOCAL COUNCIL FOR THE AUTHORIZED DISPOSAL LOCATION AND RECYCLING FACILITIES. i360 international Ltd Unit 5, Pagoda Park Westmead Industrial Estate Swindon SN5 7UN www.i360online.com...