LG 28TL520S Owner's Manual page 22

Troubleshooting Network Problems
1 Press the (Home) button on the remote to
access the Home menu. Point the
icon and select by pressing the
button on the remote.
2 Point the (All Settings) icon and select
by pressing the Wheel (OK) button on the
remote.
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection → Advanced
Wi-Fi settings.
NETWORK
Picture
Sound TV Name
[LG] WebOS TV WEBOS3
Wired Connection (Ethernet)
Programmes Programmes
Not Connected
Wi-Fi Connection
Not Connected
Network
Wi-Fi Direct
LG Connect Apps
General
Safety
Accessibility
Accessibility
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV, AP
(Router).
Power off and power on the TV, AP (Router).
2
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
company.
(Settings)
Wheel (OK)
All Settings
WI-FI NETWORK
Picture
Network /
ON
Sound ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
Network
WI-FI : EEE
General
Add a hidden wireless network
Connect via WPS PBC.
Safety
Connect via WPS PIN.
Advanced Wi-Fi Settings
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
Contact internet service provider or AP (Router)
3
company.
When X appears next to DNS:
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
3 Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the AP (Router) manufacturer's website
to make sure your router has the latest firmware
version installed.