The device monitors inner temperature in real time. When the temperature exceeds the set
warning or alarming temperature, the device will display prompt messages for you to take
measures in a timely manner.
Steps
1. Go to Settings → Auxiliary Functions → Intelligent Temperature Control.
2. Enable Intelligent Detection.
3. Slide the slider to set Warning Temperature and Alarming Temperature.
Note
● When the temperature exceeds the set warning temperature, the temperature in status bar
on the upper right corner turns orange.
● When the temperature exceeds the set alarming temperature, the temperature information
pops up and prompts you to turn off the device.
6.9 Advanced Settings
Select Settings → Advanced Settings. You can set parameters as follows.
Interactive Tablet User Manual
Figure 6-11 Intelligent Temperature Control
27