Advertisement
Quick Links
Manufactured by:
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • alan@kdframes.com
P A R T S
L I S T
BACK RAIL
K-41
SEAT RAIL
K-2
K-15 20" SEAT SLAT CAPS
K-18 25" BACK SLAT CAPS
K-65
PROP CONNECTOR
BACK LEG (Left and Right)
K-6
SEAT LEG
K-7
K-10 SEAT SLAT SUPPORTS
K-18 BACK SLAT SUPPORTS
PROP
K-4
PARTS
(2) K-4 PROP - 15"
(2) K-15 SEAT SLAT CAP - 20"
(2) K-18 BACK SLAT CAP - 25"
(1) K-10 SEAT SLAT SUPPORT - 24"
(1) K-18 BACK SLAT SUPPORT - 29"
(2) K-7 SEAT LEG - 9"
Instructions for
Studio Bifold
Queen
sku# 7721-BI-Q
2
MIDDLE SLATS
K-64
2
BACK SLATS
K-61
2
SEAT SLATS
K-62
2
H-W
WHEELS
1
H-8
2-1/4" CLEVIS PIN
2
H-12 3-1/4" CLEVIS PIN
2
HAIR PIN
H-5
1
H-11 WOOD DOWEL
1
H-19 1-3/4" WOOD SCREW
2
3/4" WOOD SCREWS
H-34
(2) K-61 BACK SLAT - 76"
(2) K-62 SEAT SLAT - 76"
(7) K-64 MIDDLE SLAT - 72"
(1) K-65 PROP CONNECTOR - 60"
(2) K-2 SEAT RAIL - 37"
(2) K-41 BACK RAIL - 34"
K-6L BACK LEG (Left) (1)
K-6R BACK LEG (Right) (1)
1
v. 0414
7
2
2
2
2
4
2
6
20
28
4
Attach a Wheel (H-W) to each Seat
Rail (K-2) using 3/4" Wood Screws
(H-34) as shown.
Push Wood Dowels (H-11)
all the way into holes
as shown.
K-4 PROP (2)
3
Press the Prop Connector (K-65) onto
the Wood Dowels on the Props (K-4)
and attach with 1-3/4" Screws (H-19).
H-19
K-55
K-4
NOTE:
The Prop Connector (K-65)
shown above is shortened
to save space.
K-1 BACK RAIL (2)
K-2B SEAT RAIL (2)
K-4
Advertisement
Summary of Contents for kd frames Studio Bifold Queen 7721-BI-Q
- Page 1 Attach a Wheel (H-W) to each Seat Instructions for v. 0414 Manufactured by: Rail (K-2) using 3/4” Wood Screws (H-34) as shown. Studio Bifold 394 Dairy Pak Rd. • Athens, GA 30607 Queen kdframes.com • alan@kdframes.com sku# 7721-BI-Q P A R T S L I S T BACK RAIL MIDDLE SLATS...
- Page 2 Attach the Left and Right Back Legs (K-6) to the Be sure that the Prop outside of the Back Rails using Connector goes below the 3-1/4” Cevis Pins (H-12). the Back Rails. Do not put on the Hair Pins at this time. H-12 K-6R K-41...
- Page 3 Using (3) Middle Slats (K-64) K-15 Attach the Seat Legs (K-7) to the push the Wood Dowels Seat Rails using 2-1/4” Clevis Pins (H-8). into the edge holes on Secure with Hair Pins (H-5). (2) Seat Slat Caps (K-15). K-64 Find the (2) Seat Slats (K-62) and push them onto the Wood Dowels on the Slat Caps.
- Page 4 Operation: Push the Slat Decks down onto the Wood Dowels and attach with Wood Screws. H-19 Bed position: (H-19). Note: The base may need to be shifted to get the dowels to align with the holes. Sofa position: Lift up Back and swing down Prop onto Back notches on Seat Rail.