Table of Contents
Advertisement
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For
best performance, Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from
your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you'll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 5 forward to 15 back.
SUPPLIED ACCESSORIES
Check the accessories before installations.
•
Operating Instruction book
•
Tuner Cable Cover
[ The illustration shows only a basic view; actual appearance may differ.]
6
•
Remote Control Transmitter
•
AC Adaptor & AC Cord
•
Batteries for the Remote
Control Transmitter
(2
AA size)
•
Warranty Card
Advertisement
Table of Contents
