Fault
flashes.
All other error codes.
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
Cause and troubleshooting
Door is not closed.
Close the door.
1.
Press Start/Reload/Pause
2.
gramme.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 61
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed Start/Reload/Pause
Press Start/Reload/Pause
▶
Door is not closed.
Close the door.
1.
Press Start/Reload/Pause
2.
gramme.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 41
▶
- Ready In +
Check whether - Ready In +
▶
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Reload/Pause
4.
gramme.
is activated.
Continue the programme by selecting
▶
Drain and pressing Start/Reload/Pause
→ "Resuming the programme when the programme
status is Rinse Hold", Page 40
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 40
▶
is activated.
Troubleshooting en
to start the pro-
.
.
to start the pro-
is activated.
to start the pro-
Spin or
.
53