croydon ES4EA-25E001 A0 Assembly, Installation And Operation Instructions

Advertisement

INSTRUCTION MANUAL
JUICER - MODEL ES4EA-25E001 A0
-PLEASE read these instructions carefully before operating this appliance.
IMPORTANT
-This unit is designed to operate on alternative current (A.C.) only.
-DO NOT CONNECT TO DIRECT CURRENT (D.C.)
-Do not leave unit in operation without an attendant.
-When not in use for long period unplug the appliance.

INSTALLATION AND OPERATION

-Check if voltage of your power system corresponds to the same specified on the
appliance label.
-Assembly the Unit Top (Bowl) on the Juicer.
-Place the desired juicer implement on the drive shaft (the large implement for orange
and the small for lemon).
-Put the strainer in the juicer cup and position near the outlet of the top unit drain to catch
the juice.
-Turn on the appliance switch and place the fruit (orange or lemon cut in half) on the
spinning implement and carefully press down.
-To turn off the appliance turn off the switch.

CLEANING PROCEDURE

-Immediately after having been used, to avoid change of juice taste, wash with water the
juicer cups, strainer, implement and top unit (Bowl).
-Unplug Juicer and clean body and base, using only a damp cloth.
-Never use water jet or immerse appliance in water.
-Wipe off appliance with a dry cloth.
CROYDONMAQ INDUSTRIAL LTDA.
CROYDON
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150
Phone: 55 21 2776-1928 / 55 21 2676-1512
e-mail: croydon@croydon.com.br
Fax: 55 21 2676-2522
CROYDON
ES4EA-25E001 A0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES4EA-25E001 A0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for croydon ES4EA-25E001 A0

  • Page 1 INSTRUCTION MANUAL CROYDON JUICER - MODEL ES4EA-25E001 A0 -PLEASE read these instructions carefully before operating this appliance. IMPORTANT -This unit is designed to operate on alternative current (A.C.) only. -DO NOT CONNECT TO DIRECT CURRENT (D.C.) -Do not leave unit in operation without an attendant.
  • Page 2 Big Foot 3.000-3 Small Foot 2.193-3 Cord Connection 4.405-3 Strainer 4.406-3 Wiring diagram SWITCH Technical Data ES4EA-25E001 A0 Voltage (V) 220 (50Hz) Power (HP) Amperage (A) Speed (rpm) 1700 Capacity (l/h) Weight (kg/lbs) 7.6/16.7 Dimensions W x H x D (cm/in)

This manual is also suitable for:

Es4ea

Table of Contents