hello by design 000F8P Instructions

(1)
Receiver
(1) Front view of wireless mouse (2.4 Ghz)
(2) Back view of mouse; location of battery cover
(3) Open the battery cover; receiver located above battery compartment
(4) Remove receiver from compartment
(5) Plug receiver into USB port

Battery Installation Instructions:

1. Remove cover and insert 2 AAA batteries (not included) following the polarity markings (+/-) inside the
battery compartment.
2. Make sure receiver is plugged into the USB port.
3. Place the battery cover to close battery compartment.
CAUTION:

BATTERIES SHOULD BE REMOVED AND REPLACED BY ADULTS ONLY. Keep away from children.

Do NOT mix old and new batteries.

Do NOT mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

Be sure to check the expiration date because fresh batteries will ensure uninterrupted usage/enjoyment
of the product.

To avoid explosion or leakage, do not dispose of batteries in a fire or attempt to charge standard or
alkaline batteries (non-rechargeable batteries).

Remove batteries when not in use for a long period. Always remove exhausted batteries from the
product. The supply terminals are not to be short-circuited.

Do dispose of batteries according to the local law and regulations of your region.
WIRELESS MOUSE SET OF 2
SKU#: 000F8P
INSTRUCTIONS
(2)
(4)
(3)
Battery Cover
Receiver
Requires 2 AAA
Batteries (not
included)
(5)