IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 3
57-72 Ø60 Ø60 Ø60 Ø60 Ø60 G 1 2 " Ø30 Ø24 Referring to the dimensions Make the connections and shown in picture, embed the check that is watertight body (1) into the wall, and there are no leaks. checking that it is well IMPO RTANT: leave the aligned plastic protection mounted...
Page 4
Remove the protections, assemble (and cut if necessary) 3 extensions according to scheme 3a-3b Insert the spout in the plate Assemble the handles (5a) and screw it to the desired position (5b) using teflon or hamp...
Page 5
Screw the thread connection and the plate (6): check if it is necessary to use the extension supplied (7a), and if it is necessary to cut it according with the scheme (7b+7c) Screw the connection into his place and secure it using teflon or hamp...
Page 6
Insert the shower hook and fix it with the grub screw...