IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 4
Assemble the article according to pictures: -Drill the top according to the dimensions in figure -Insert the uprights in the holes and fix them with the kits supplied (figure 2) according to the dimensions in figure 3 -Screw the caps making sure that the o-rings are underneath the caps (figure 4) -Screw flexible pipes and rod in the spout base, and position the gasket (figure 5)